Wallis Dually Fenders (www.wallisduallyfenders.com) manufactures aftermarket rear fiberglass dually fenders and dually conversion fenders for the following: aftermarket rear fiberglass replacement Ford F250 F350 F450 dually fenders for 1987-2014 model years, aftermarket rear fiberglass replacement Dodge 3500 dually fenders for 1981-2009 model years, aftermarket rear fiberglass replacement Chevy 3500 dually fenders for 1973-2007 model years and aftermarket rear fiberglass replacement GMC dually fenders for 1973-2007 model years. Our in-house produced dually fenders rear replacement aftermarket fiberglass are for sale through our website (for sale craigslist cheap) and by phone. While not cheap in construction or used our rear aftermarket fiberglass replacement dually fenders and dually conversion fenders are far more economical than dually fenders for sale and purchased through the OE dealer network. We sell and ship our rear aftermarket replacement fiberglass for sale dually fenders in the USA, Canada and Mexico. However, if you are outside the USA please call for shipping rates. 

Ford F350 Dually Fenders

Ford F350 Dually Fenders for sale rear replacement aftermarket fiberglass USA (ford +dually + fenders, ford +dually +fender): This series was produced from 1980-1997. Our Ford dually fender fits model years: 1987,1988,1989,1990, 1991,1992,1993,1994,1995,1996,1997. Now, many of our customers use our Ford F350 dually fenders to replace dually fenders on dually trucks produced in: 1980,1981,1982,1983,1984,1985,1986. However, we do not guarantee the fit for those years. The Ford F350 dually fenders USA for sale produced for this 1st generation are all hand lay with a sanding gel coat, 4 layers of chopped strand mat using polyester resin. The parts are hand trimmed with the fuel doors opened as well as the marker lights and holes drilled to match the OE on the rear flange then sanded.

Ford Dually Fenders for sale USA rear aftermarket replacement fiberglass F250 F350 F450: This series Ford dually fender fits model years:1988,1989,1990,1991,1992,1993,1994, 1995,1996,1997,1998, 1999,2000. Again, our Ford F350 F250 F450 dually fenders USA are produced using a sanding gel coat, 4 layers of chopped strand mat and a polyester resin. We then hand trim the rear flange (fender mounting retainers can be reused / reinstalled), marker light openings and drill the holes for the splash shield. Then the dually fenders are then hand sanded. For this 2nd generation we also produce a driver’s side fender with a fuel door opening made / cast into the dually fender for short bed conversions. We also stock splash shields, marker lights etc for this 2nd generation dually fender.

Ford F250 F350 F450 Dually Fenders for sale rear aftermarket fiberglass replacement aftermarket: This series Ford dually fenders USA for sale fits 2011,2012,2013,2014 model year. There are actually two (2) sub-series for this generation. We produce a rear aftermarket fiberglass replacement Ford dually fender for the 2011,2012 model years. These years were produced with a smaller rock guard. Then we also produce a Ford rear replacement fiberglass aftermarket dually fender (used cheap for sale craigslist) for the 2013, 2014 model years. This dually fender uses a larger rock guard. Also, we produce a 2013+ driver’s side Ford F250 F350 F450 dually fender for sale rear aftermarket fiberglass replacement with a cut-out for the square fuel door for short bed conversions. Other than the allowance for the difference in the rock guard the specs are the same. Again, these rear aftermarket replacement fiberglass Ford F350 dually fenders for sale are produced using a sanding gel coat, 4 layers of chopped strand mat and a polyester resin. The rear flange is trimmed to match the OE specs, the marker lights are opened and holes drilled for the splash shield then sanded. We stock a full compliment of replacement parts for this dually fender (marker lights, splash shield etc).

Dodge Ram 3500 Dually Fenders

Rear Dodge Dually Fenders for sale fiberglass aftermarket replacement pre-1980: We do not actually manufacture a “direct” replacement for the 1st generation Dodge dually truck. However, the mounting specs to the metal bedside are the same as the 2nd generation. The difference is cosmetic / appearance. This 1st generation Dodge dually fender is larger then the 2nd generation having more of a “skirting” appearance. So, you will need to purchase a pair of the 2nd generation to properly repair your 1st generation Dodge dually truck. All our rear aftermarket fiberglass replacement Dodge dually fenders USA are produced using a sanding gel coat, 4 layers of chopped strand mat with polyester resin. Then sanded and openings drilled.

Dodge Dually Fenders for sale rear fiberglass aftermarket replacement: 1981,1982,1983,1984, 1985,1986,1987,1988, 1989,1990,1991,1992,1993: As mentioned above. This 2nd generation is a “direct” replacement for the Dodge dually trucks (USA) 1981-1993 model years (you can purchase one). And, an “indirect” replacement for the 1st generation Dodge dually trucks pre-1980 model years. All our Dodge 3500 aftermarket replacement fiberglass rear dually fenders are produced using a sanding gel coat, 4 layers of chopped strand mat with polyester resin. Then sanded and openings drilled. We also do stock replacement marker lights for the 1st and 2nd generation Dodge dually trucks.

Dodge Dually Fender for sale rear aftermarket replacement fiberglass 1994,1995,1996,1997,1998, 1999,2000,2001,2002: As with all our Dodge dually fenders USA we do everything humanly possible to match the OE specs. This 3rd generation rear Dodge dually fender for sale USA aftermarket replacement is produced using a sanding gel coat, 4 layers of chopped strand mat and polyester resin. Then sanded and the dually fender is hand trimmed opening the marker lights, the rear mounting flange and drilling the openings for the two below (left and right of the wheel well) mounting flanges. We also stock the small splash shields and side marker lights for this 3rd generation Dodge dually truck.

Rear Dodge Dually Fenders, 2003-2009: This 4th generation actually has three sub-categories (a,b,c) see below:

a) Dodge Ram 3500 Dually Fender for sale rear replacement aftermarket fiberglass 2003, 2004, 2005 Model Years: This Dodge dually fender (craigslist cheap for sale) has the “small” rear mounting bracket used for Dodge dually trucks USA produced in 2003, 2004 and 2005 model years. Even though the Dodge dually trucks have the same exterior appearance from 2003-2009. The mounting brackets are different 2003-05 vs. 2006-09 model years. You cannot mix and match if you expect your replacement fender to install properly.  As with all our Dodge dually fenders we do everything humanly possible to match the OE specs. This 4th generation Dodge dually fender is produced using a sanding gel coat, 4 layers of chopped strand mat and polyester resin. Then sanded and the dually fender is hand trimmed opening the marker lights, the rear mounting flange and drilling the openings for the two below (left and right of the wheel well) mounting flanges. We also stock the splash shields and side marker lights for this 4th generation Dodge dually truck.

b) Dodge Ram 3500 Dually Fenders for sale rear aftermarket fiberglass replacement, 2006, 2007, 2008, 2009 Model Years: This Dodge 3500 dually fenders USA aftermarket rear replacement fiberglass (cheap craigslist for sale) has the  "large” rear mounting bracket used for Dodge dually trucks produced in 2006, 2007, 2008 and 2009 model years. Even though the Dodge dually trucks have the exterior appearance from 2003-2009. The mounting brackets are different 2003-05 vs. 2006-09 model years. You cannot mix and match if you expect your replacement fender to install properly.  As with all our Dodge dually fenders we do everything humanly possible to match the OE specs. This 4th generation Dodge dually fender is produced using a sanding gel coat, 4 layers of chopped strand mat and polyester resin. Then sanded and the dually fender is hand trimmed opening the marker lights, the rear mounting flange and drilling the openings for the two below (left and right of the wheel well) mounting flanges. We also stock the splash shields and side marker lights for this 4th generation Dodge dually truck.

c) Dodge 3500 Dually Fenders for sale rear fiberglass aftermarket replacement (MegaCab) 2003,2004,2005,2006,2007,2008,2009: This Dodge dually fenders USA for sale rear replacement fiberglass aftermarket fender was originally produced USA starting in the 2006 model year on short bed Dodge dually trucks. However it will fit all (long or short bed) Dodge Ram 3500 dually trucks from 2003-2009 model years. As with all our rear fiberglass aftermarket replacement Dodge dually fenders for sale we do everything humanly possible to match the OE specs. This 4th generation Dodge Ram 3500 dually fender (MegaCab) is produced using a sanding gel coat, 4 layers of chopped strand mat and polyester resin. Then sanded and the dually fender (cheap for sale used craigslist EBay)is hand trimmed opening the marker lights, the rear mounting flange and drilling the openings for the two below (left and right of the wheel well) mounting flanges. We also stock the splash shields and side marker lights for this 4th generation Dodge dually truck.

Chevy GMC Dually Fenders

GMC Chevy Dually Fenders for sale rear aftermarket fiberglass replacement 1973-1987: This rear GMC Chevy aftermarket replacement fiberglass dually fender for sale will fit model years 1973,1974,1975,1976,1977,1978,1979,1980,1981,1982,1982,1984, 1985,1986,1987. Our Chevy GMC dually fender has pre-installed stainless steel rear studs to match the OE pattern. And, as with all our GMC Chevy aftermarket fiberglass dually fenders USA (for sale EBay Cheap craigslist), is produced using a sanding gel coat, 4 layers of chopped strand fiberglass mat and polyester resin. We sand them, cut the side marker light openings before bubble wrapping and boxing for shipment. This rear GMC Chevy fiberglass aftermarket repalcement dually fender is, at times, particularly difficult to remove. You will save a lot of time and frustration if you spray the rear studs with a “liquid wrench” – type material a day or two ahead and plan to heat and cool several times with a plumber’s torch. This fender is easily recognized because it has larger “vertical” mounting side marker lights.

GMC Chevy Dually Fenders for sale aftermarket rear fiberglass replacement 1988-2000: This GMC Chevy rear dually fender for sale fiberglass aftermarket replacement will fit model years 1988,1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000. Our Chevy GMC dually fenders USA repalcement rear fiberglass aftermarket has pre-installed stainless steel rear studs to match the OE pattern. And, as with all our Chevy GMC aftermarket fiberglass dually fenders for sale (cheap craigslist), is produced using a sanding gel coat, 4 layers of chopped strand fiberglass mat and polyester resin. We sand them, cut the side marker light openings before bubble wrapping and boxing for shipment. This 2nd generation rear GMC Chevy fiberglass aftermarket replacement dually fender for sale is, at times, particularly difficult to remove (as like the 1st generation). You will save a lot of time and frustration if you spray the rear studs with a “liquid wrench” – type material a day or two ahead and plan to heat and cool several times with a plumber’s torch. This fender is easily differentiated from the 1st generation because it has the more common horizontal mounted side marker lights.

Note: In the late 80′s models the is some 1st generation overlap with crew cabs. Verify which fender generation you have by the side marker lights prior to ordering.

Chevy GMC Dually Fenders for sale rear aftermarket replacement fiberglass 2001-2007: This rear GMC Chevy dually fender for sale repalcement aftermarket fiberglass fits model years 2001, 2002, 2003, 2004, 2005, 2006, 2007. As with all our rear Chevy GMC aftermarket fiberglass replacement rear fiberglass dually fenders USA (for sale craigslist cheap), is produced using a sanding gel coat, 4 layers of chopped strand fiberglass mat and polyester resin. We sand them, cut the side marker light openings before bubble wrapping and boxing for shipment. There are several items of note specific to this Chevy / GMC dually fender. First, we leave extra material or “under-trim” the area around the tail light and top flange. This is done to protect against damage during transport. You need to assume that a little extra time is needed to sand, file or grind in this area. Two, there is natural small outward bow to the fender. Again, this is done on purpose. The fenders naturally want to settle or bow inward. This small bow straightens as the fender is installed. At times, when the weather is cold, the fender can be heated to ease installation. And lastly, with this fender we match the “outside” dimensions of the OE fender. So, you may at first assume the fender is “long”. It is not. And, feedback from customers indicate this fender is a two person job and plenty of time should be allotted for installation.